Personal protective equipment
Retractable type and guided type fall arrestersRetractable type fall arresters
Retractable type fall arresters
Work performed at heights requires special equipment to protect workers from falls. Carrying out tasks while hanging in a harness on a rope can be particularly difficult when both vertical and horizontal movement is required. Fortunately, in the offer prepared by PROTEKT you can find special retractable type fall arresters that facilitate movement and at the same time allow workers to control the rope.
CR 255VG
Vertical self-locking device approved for use in potentially explosion-hazard areas.
CR 260HV
Self-braking device for vertical and horizontal operation with textile shock absorber
CR260 V
Self-locking device for vertical work
DWR 040S
Double webbing retractor claiming the possibility to go above the device
ROLEX 4
Fall arrester for vertical work
ROLEX 5
Fall arrester for vertical work
ROLEX 6
Fall arrester for vertical work
WR 040HV
Self-braking device for use vertically and horizontally in situations where a fall over the edge may occur.
WR 040MEWP
Retractable type fall arrester for on basket platforms (MEWPs)
AY 070
Steel auxiliary rope for cooperation with self-locking devices.
DT 760
An auxiliary rope designed for use with self-braking devices.
CR 030
Fall arrester for vertical work
CR 210
Steel fall arrest device for vertical work
CR 250HV
Self-locking device for vertical and horizontal operation
CR 250HVG
Self-locking device for vertical and horizontal operation approved for use in potentially explosion-hazard zones
CR 250V
Fall arrester for vertical work
CR 250VG
Self-locking device for vertical operation approved for use in potentially explosion-hazard zones
CR 251V
Fall arrester for vertical work
CR 255V
Fall arrester for vertical work
CR 300
Fall arrester for vertical work
CRW 200
Fall arrester / Retractable rescue winch
CRW 200G
Fall arrest device / Retractable rescue winch approved for use in potentially explosion-hazard zones
CRW 300
Fall arrester / Retractable rescue winch
CRW 300G
Fall arrest device / Retractable rescue winch approved for use in potentially explosion-hazard zones
WR 020
Fall arrester for vertical work
Retractable type fall arresters for work at heights
Protekt is a leading manufacturer of equipment and entire systems for protecting workers performing a variety of work at heights. As specialists in the industry, we offer:
- vertical/horizontal/vertical and horizontal fall arresters with different parameters;
- double fall arresters;
- rescue fall arresters.
Depending on the model, fall arresters for work at height are available in versions suitable for work in hazardous areas. In our offer, you can also find accessories for use with fall arresters.
Top quality of fall arresters by PROTEKT
Fall arresters for work at heights supplied by Protekt have been manufactured in accordance with strict safety standards. They're approved for use as a component of individual fall protection equipment (full compliance with EN 360:2002).
